Skip to main content

🐍 Creating a Serpentine Layout with Curved Tables

A serpentine layout is a long, S-shaped table made by joining curved tables together. It’s a great way to add flow to your seating and make the most of your venue space.

Written by Nina Dobrev

🧩 What You’ll Need

  • Two or more curved tables from the Library tab (150x75cm, 240x75cm or 300x90cm)

  • Your floorplan open in editing mode (click Start editing)

💡 Tip: Use the same size curved table for every section, so the ends line up neatly.

Step 1: Add Your First Curved Table

  • Go to the Library tab

  • Drag a curved table onto the canvas, or click the + next to it

  • Click the table to open its settings in the Design tab, and adjust the Outer radius, Depth and Angle under Curve if needed

🔁 Step 2: Add and Flip the Next Table

  • Add a second curved table of the same size

  • Give it the same Outer radius, Depth and Angle as the first one

  • Under Rotation, click +90 twice (180°) so the curve faces the opposite way

This alternating curve is what creates the S-shape.

📌 Note: When you rotate a table 180°, its name (e.g. “TABLE 2”) will also appear upside down on the canvas. This is normal and doesn’t affect your seating.

📏 Step 3: Line Them Up

  • Drag the second table so its end meets the end of the first table

  • For a precise fit, fine-tune it using the Position values in the Design tab

📌 Note: Curved tables don’t connect or snap to each other automatically yet, so you’ll need to line them up by hand. Automatic connecting is planned for a future update.

🔂 Step 4: Repeat

Keep adding tables, flipping every other one, until your serpentine is the length you need.

💺 Step 5: Set Up Seats and Guests

For each table:

  • Under Seat count, set the seats for the Outer curve and Inner curve

  • Set Right end and Left end to 0 where tables join, so there are no seats in the gaps

  • Scroll down to Manage seats to assign guests to each seat

📌 Note: Each curved table keeps its own seat numbers (e.g. 1.1, 1.2 for Table 1, and 2.1, 2.2 for Table 2), so the serpentine is made of separate tables on your seating chart.

🔒 Step 6: Lock Your Layout

Once everything is lined up, lock your tables so they don’t get moved by accident. Here’s how: 🧩 Floorplan View Mode & Locking

💡 Tip: You can also create a similar curved shape from a single table, by adjusting its Angle. That’s handy for shorter layouts.

Did this answer your question?